В окне Hardware Monitor можно следить за: Users can also customize the buttons to suit specific needs. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. Make sure that you use only AMD-certified heatsink and fan assembly. The motherboard supports the following RAID configurations. Доступность продуктов зависит от региона.
Product warranty or service will not be extended if: Hardware information Before you proceed Software assu Installing an operating system Operation is subject to the following two conditions: Refer to the following sources for additional information and for product and software updates. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty m22n, that may have been added by your dealer.
Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. Information to prevent injury to yourself when trying to complete a task. Information to prevent damage to the components when trying to complete a task. This chapter describes the motherboard features and the new technologies it supports. Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.
ASUS M2N-VM DH цена, характеристики, отзывы
See page for details. This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. Chapter summary Before you proceed The illustration below shows the location of the onboard LED.
Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. These items are greyed out in the given motherboard layout. Locate the CPU socket on the motherboard. The lever clicks on the side tab to indicate that it is locked. Install a CPU heatsink and fan following the instructions that came with the heatsink package.
Драйверы для ASUS M2N-VM DH
Make sure that you use only AMD-certified heatsink and fan assembly. To install the CPU heatsink and fan: Place the heatsink on top of the installed CPU, making mm2n that the heatsink fits properly on the retention module base. Push down the retention bracket lock on the retention mechanism to secure the heatsink and fan to the module base.
Hardware monitoring errors can occur if you fail to plug this connector. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. Visit saus ASUS website www. C — Supports three modules inserted into both the blue and black slots as two pairs of dual-channel memory configuration.
Магазины, в которых можно купить этот товар и его аналоги
Support the DIMM lightly with your fingers when pressing the retaining clips. Remove the DIMM from the socket. Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support.
Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Removing the cap will cause system boot failure! This pin port connects a parallel printer, a scanner, or other devices. This connector is for a serial COM port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
Never connect a cable to the USB connectors. Doing so will damage the motherboard! The USB module is purchased separately. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. Connect the ass power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system.
Chapter summary Starting up for the first time Check the jumper settings and azus or call your retailer for assistance. Follow the instructions in Chapter 4. Powering off the computer 3. Make sure that the Shut Down assus button is selected, then click du OK button to shut down the computer. Detailed descriptions of the BIOS parameters are also provided.
ASUS M2N-VM DH драйверы
Managing and updating your BIOS The utility copies the current BIOS file to the floppy disk. Save the BIOS file to a bootable floppy disk. Write the BIOS filename on a piece of paper.
Doing so can cause system boot failure! Restart the system after the utility completes the updating process. The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. At the bottom right corner of a menu screen are the navigation keys for that particular menu.
Use the navigation keys to select items in the menu and change the settings. Some of the navigation keys differ from one screen to another. When set to [Disabled], the data transfer from and to the device occurs one sector at a time.
Selects the PIO mode.
The BIOS automatically detects the items in this menu. Overclock Profile — loads overclocking profiles with optimal parameters for stability when overclocking.
Memory Voltage [Auto] Allows you to select the memory voltage or set it to auto for safe mode. The following items mn2 only when the AI overclocking item is set to [Manual].
The value of this item is auto-detected by the BIOS. The Bank Interleaving item appears only when you use a memmory that supports this function. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, aus USB controller legacy mode is enabled. This allows you to enable or disable the full screen logo display feature.
After you have set a supervisor password, the other items appear to allow 2mn to change other security settings. Security Settings Supervisor Password: Not Installed User Password: Please see pagesection 4.
Select OK to load default values. This chapter describes the contents of the support CD that rh with the motherboard package. Chapter summary Installing an operating system The contents of the support CD are subject to change at any time without notice.
The CD automatically displays the Drivers menu if Autorun is enabled in your computer.
This utility helps you keep your computer in healthy operating condition. The anti-virus application scans, identifies, and removes computer viruses.
View the online help for detailed information. You can also find this information on the inside front cover of this user guide. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. The motherboard supports the following RAID configurations.
RAID 0 Data striping optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks. The following screen appears. Take caution in using this option. All data on the RAID drives will be lost! The following confirmation message appears. After the rebuild process, the Array list menu appears. M2m create a RAID driver disk: